Triceratops Dirk at Naturalis

Naturalis reconstructs dinosaur skeletons with large-scale 3D printing

And here he is, Dirk the Triceratops! After months of scanning, 3D printing, mounting original bones and 3D prints, Dirk is proudly on display at the dinosaur gallery of Naturalis.

Naturalis Biodiversity Center, located in Leiden the Netherlands, is the national research institute for biodiversity and responsible for one of the biggest natural history collections in the world, counting over 42 million different objects. This includes a 66 million year old T. rex skeleton which was discovered in 2013 in Montana US, and other dinosaurs such as a Triceratops nicknamed Dirk. After a construction period of 2 years, Naturalis has opened the doors to a completely new museum.

Inside Naturalis museum.
New Naturalis museum in Leiden, the Netherlands.

The skeleton of Dirk was dug up near Newcastle, Wyoming, US. The animal lived about 67 million years ago. When working on the skeleton it became clear that some bones were missing, including a number of ribs, one of the horns and a large part of the skull. Naturalis wanted to reconstruct the skeleton of Dirk to put on display it in their newly opened museum. With modern technology such as 3D scanning and large scale 3D printing, they were able to complete the skeleton of Dirk.

Dig site in Wyoming, US.
Digging up the skeleton of Triceratops Dirk in Wyoming, US.

Dr. Peter H. Schalk, Director of Public and Markets at Naturalis explains: “Modern day palaeontologists use 3D imaging and printing techniques as an instrument to reconstruct fossil remains that are discovered in scientific excavations. An industrial Builder Extreme 3D printer is deployed in the LiveScience gallery of the new Naturalis museum as an ongoing demonstration to the public how missing parts are printed and fitted in dinosaur skeletons.”

Builder Extreme 1500 PRO
The Builder Extreme 1500 PRO in the LiveScience area of Naturalis

Naturalis is no stranger to 3D printing. The museum has been using this technology for a couple of years now, but so far only on small scale, with small 3D printers. “This works perfectly fine if you only need 3D prints of a handful of smaller bones”, says palaeontologist prof. Anne Schulp, researcher at Naturalis, “…and for a single larger bone, combining a couple of smaller prints isn’t too much of a hassle. For a really big project such as Triceratops Dirk though, we had to look further, and that’s where the Builder Extreme came in focus.” The bones that needed to be printed of Triceratops Dirk were between 50 to 130 cm long. Therefore Naturalis invested in the Builder Extreme 1500 PRO which has an extremely long print bed.

2 large 3D-printed bones.
2 large bones of the lower leg of a Triceratops (Tibiae)

Before the scientists could start 3D printing, they needed to scan the bones of other Triceratopses to be able to complete the skeleton of Dirk. “If we have, for example, a left bone and the right-side counterpart is missing, we can easily make a scan and a mirrored 3D print,” Schulp explains. “For some other bone elements, particularly the vertebrae, we were welcome to use a scan of a Triceratops skeleton in the collections of the Children’s Museum in Indianapolis. Their Triceratops skeleton is very much complementary to what we found of Dirk.” After processing the scans, the 3D printing process started. The Builder Extreme has been printing 24/7 for the last couple of months and printed a hundred different elements. Some of the bones found, were simply too fragile to put on display so they were scanned and printed as well. The ribs of Dirk for example, were not all sufficiently well-preserved to allow mounting in the skeleton, and some were even missing, so they have all been 3D printed.

The 26 3D printed ribs of the Triceratops. Picture taken 3 meters above the ground.
The 26 3D printed ribs of the Triceratops. Picture taken 3 meters above the ground.
Dirk's Ribs
The 26 3D printed ribs mounted to the skeleton of Triceratops Dirk.

For Naturalis it was really important that every little detail of the bone was visible in the 3D printed part so they have been 3D printing the parts in the highest quality possible. Some of the bones have a complex shape and needed to be printed with support structure. After printing, the support was removed and the bones were painted by hand by Remmert Schouten from Nichecraft. Because the bones show every little detail and look like real bones, Naturalis has chosen to paint the bones in a slightly lighter colour than the actual bones so visitors can tell the difference.

Close up of Dirk's skull.
Close-up of the almost fully 3D printed skull of Triceratops Dirk.

Although Dirk has just been completed, the Builder Extreme 1500 PRO is already fully booked for another big project Naturalis is working on. The Builder Extreme 3D printer is displayed in LiveScience gallery of the new Naturalis museum as an ongoing demonstration to the public how missing parts are printed and fitted in dinosaur skeletons.

Pictures courtesy of Naturalis
www.naturalis.nl

Some more images of the printed Triceratops bones

Next Case: